PREFORMANCE RANGE
¡ù Flow rate up to 267.2 l/min. (16 m3/h)
¡ù Dynamic head up to 150m.
OPERATION CONDITIONS
¡ù Suction lift up to 7m
¡ù Fluid temperature up to 35¡æ
¡ù Maximum ambient temperature up to 40¡æ
¡ù Maximum working presure 15 bar
INSTALLATION AND USE
Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made. The high efficiency and adaptability of these pumps to even the most unusual of applications, makes them ideal for use in the domestic, civil and industrial sectors; in particular for the distribution of water in combination whit pressure sets and for pressure boosting. The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
PERFORMANCE
¡ù Particularly ample and stable characteristic curves (high ratio between minimum and maximum head values);
¡ù Outputs having high absolute values and tendencially flat curves;
¡ù Flat absorption curves at high delivery rates, preventing motor overloading even during prolonged use;
¡ù Good suction capacities both at low and high delivery rates;
¡ù Water inlet and outlet can be rotated for proper assembly in accordance with installation requirement.
STRUCTURE CHARACTERISTICS
¡ù Stainless steel pump body
¡ù Cast iron pump inlet
¡ù Cast iron motor support
¡ù Stainless steel mechanical seal (graphite to ceramic)
¡ù Noryl impeller with centrifugal radial flow type
¡ù Stainless steel shaft
¡ù Protection IP44
¡ù With thermal overload protector in single phase motor
¡ù NSK bearing or local bearing
|